Category: Shuttle Missions
-
Invocon on STS-125
May 11, 2009 – May 24, 2009 Space Shuttle Atlantis This was the thirty-second flight of Invocon hardware on the Space Shuttle. Below is a list of the IVC systems that are present on Atlantis during the mission: 44 EWB MicroTAU™ Wing Leading Edge 1 MicroSGU™ Aft Section 2 EWB MicroTAU™ Seat DTO Enhanced Wide-Band…
-
Invocon on STS-119
March 15, 2009 – March 28, 2009 Space Shuttle Discovery This was the thirty-first flight of Invocon hardware on the Space Shuttle. Below is a list of the IVC systems that are present on Discovery during the mission: 44 EWB MicroTAU™ Wing Leading Edge 1 MicroSGU™ Aft Section 2 EWB MicroTAU™ Seat DTO Enhanced Wide-Band…
-
Invocon on STS-126
November 14, 2008 – November 30, 2008 Space Shuttle Endeavor This was the thirtieth flight of Invocon hardware on the Space Shuttle. During STS-126 mission, the Endeavor crew completed four spacewalks to perform maintenance on the ISS along with installing new external equipment. Below is a list of the IVC systems that are present on…
-
Invocon on STS-124
May 31, 2008 – June 14, 2008 Space Shuttle Discovery This was the twenty-ninth flight of Invocon hardware on the Space Shuttle. During STS-124 mission, the Discovery crew will be attaching the Japanese Kibo Module to the International Space Station along with doing some station repairs. Below is a list of the IVC systems that…
-
Invocon on STS-123
March 11 – 26, 2008 Space Shuttle Endeavour This was the twenty-eighth flight of Invocon hardware on the Space Shuttle. During STS-123 mission, the Endeavour crew installed the first Japanese module to be attached to the station along with the DEXTRE robotics system. Two IVC systems were present on the orbiter. Below is a list…
-
Invocon on STS-122
February 7 – 20, 2008 Space Shuttle Atlantis This was the twenty-seventh flight of Invocon hardware on the Space Shuttle. During STS-122 mission, the Atlantis crew installed the European Columbus module along with performing many other ISS construction tasks. Two IVC systems were present on the orbiter. Below is a list of the IVC systems…
-
Invocon on STS-120
October 23 – November 7, 2007 Space Shuttle Discovery This was the twenty-sixth flight of Invocon hardware on the Space Shuttle. During STS-120 mission, the Discovery crew delivered the Harmony module to the International Space Station. Two IVC systems were present on the orbiter. Below is a list of the IVC systems that were present…
-
Invocon on STS-118
August 8 – 21, 2007 Space Shuttle Endeavour This was the twenty-fifth flight of Invocon hardware on the Space Shuttle. During STS-118 mission, the Endeavour crew installed the EWIS Antenna that will be used with the EWIS NCU when it is activated during a later mission. Two IVC systems were present on the orbiter and…
-
Invocon on STS-117
June 8 – 22, 2007 Space Shuttle Atlantis This was the twenty-fourth flight of Invocon hardware on the Space Shuttle. During STS-117 mission, the Atlantis crew performed rewiring tasks to connect the new solar arrays to the power system. Two IVC systems were present on the orbiter and another was attached to the truss. Below…
-
Invocon on STS-116
December 9 – 22, 2006 Space Shuttle Discovery This was the twenty-third flight of Invocon hardware on the Space Shuttle. The STS-116 mission marked the second mission to continue ISS construction after the loss of Columbia during STS-107. During this mission, the Discovery crew performed rewiring tasks to connect the new solar arrays to the…