Invocon has developed technologies for diverse, customer specific applications: in space, under water, in tunnels, on aircraft, in tires, on gears… This page introduces a few of these applications and describes how Invocon technologies have been utilized for application-specific data acquisition.
To view Invocon’s “Hallmarks of Success” in the space program, click here.
If you have any questions about your specific application or if you need information regarding any of our technologies please contact our Field Applications Engineering group.
Visit Invocon’s Technology Matrix to see a comparison of all our systems.
-
Dual-Dual BNC Switch
Ground Support Equipment for Telemetry (TM) The Invocon Dual-Dual BNC Switch (DDBS) provides dual manually operated 7-position dual BNC switches in a standard 2U 19-inch rack chassis configuration. Each of the two/dual halves allows connecting a common signal (C) to one of 7-positions (1 to 7). Each rotation of a selection knob simultaneously switches both…
-
Invocon Flight Computer
The Invocon Flight Computer (IFC) is designed around Invocon’s Next Generation Processing Platform (XGPP) combining multiprocessor performance with programmable logic flexibility. The IFC includes a dedicated EMI filtered power connector along with two 66 contact I/O connectors for interfacing to common launch vehicle functionality including: IMU/INS, GPS/GNSS, Thrust Vector Controller (TVC), Reaction Control System (RCS),…
-
Remote Ground Support Equipment (RGSE)
Invocon’s Remote Power Control (RPC) Remote Ground Support Equipment (RGSE) provides for power control and monitoring for Avionics or Flight Termination System (FTS) payloads. This includes system monitoring, power switching (e.g., internal/external, on/off), and battery maintenance as well as RS422 communications all through the vehicle’s UMBI(s).
-
NavFire Carrier
Invocon’s NavFire Carrier (NFC) hosts a BAE Systems NavFireTM GPSR enhancing its interface with nominal +28 Vdc MIL-STD power and RS422 signal conversion. NavFireTM signals are made available on the NFC’s connectors configurable to suit several use cases such as direct connection to a Flight Computer or connection to both an SDN500 INS and Flight…
-
Power Control Assembly
Invocon’s Power Control Assembly (PCA) provides complete power control for small launch vehicles in a robust miniature package. The PCA controls two 28V power sources for use with four power output channels.
-
Solid State Latching Relay
Invocon’s Solid State Latching Relay (SSLR) provides isolated, regulated, redudant control over an external power source and its load. The SSLR can be used as a power termination solution for Flight Termination Systems (FTS) whose mode of operation is thrust termination. The SSLR can accept two TERMINATE signals from up to two Flight Termination Recievers…
-
Solid State Event Initiator
Invocon’s Solid State Initiator (SSI) provides highly reliable and safe initiation capabilities for energetic devices (squibs). It is a solid state replacement for Invocon’s historic work horse – the Capacitive Discharge Initiator (CDI). The SSI replaces the mechanical devices of the CDI with solid state electronics while maintaining the same levels of protection for fail-safe…
-
Reentry Breakup Record – Wireless Temperature Sensor
Invocon produced a wireless temperature system that was incorporated into the Reentry Breakup Recorder (REBR), a design that was conceived and constructed by The Aerospace Corporation engineers. REBR is a basketball-sized device that is launched into orbit aboard a larger spacecraft and then intentionally deorbited when a host spacecraft returns to Earth. The REBR gathers…
-
Hit Detection Systems
Invocon provides multiple hit detection systems capable of detecting and reporting high-speed impacts. These systems have been used to detect high-speed projectile impacts on rockets and other space structures. Invocon has developed multiple impact detection systems using wire-break, hit panel, and acoustic emission type methods.
-
Integrated Pulse Coded Modulation Encoder (iPCMe)
The Integrated PCM Encoder (iPCMe) provides a significant number of data channels for remote sensing in a highly integrated configuration. With over 100 channels of input in a small package, the iPCMe is designed as a low-cost solution for a broad range of telemetry applications. Every aspect of the Encoder’s design is intended to simplify integration…
-
Solid State Latching Power Switch (SSLPS)
Invocon’s Solid State Latching Power Switch (SSLPS) provides switching control of an external DC power source with controls for up to 4 switched outputs.
-
Capacitive Discharge Initiator (CDI)
Invocon’s Capacitive Discharge Initiator (CDI) Module provides missile control and monitoring capabilities in a single compact unit. It enables safe operation and monitoring of ordnance.
-
Lithium Smart Battery
The Invocon 28V Rechargeable Smart Battery uses modern lithium-ion polymer battery technology to deliver high-performance reliable power to rocket and airframe avionics.